Transporting/Storage - Honda Power Products TILLER FJ500 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

When transporting the tiller, turn the fuel valve OFF and keep the tiller
level to prevent fuel spillage. Fuel vapor or spilled fuel may ignite.
Before storing the unit for an extended period:
1.Be sure the storage area is free of excessive humidity and dust.
2.Drain the fuel:
Gasoline is flammable and explosive under certain conditions. Do not
smoke or allow flames or sparks near the equipment while draining
fuel.
a. Place an approved gasoline container below the carburetor, and use
a funnel to avoid spilling fuel.
To drain the gasoline of the caburetor only, place a suitable container
under the caburetor and follow procedures "e." and "f.".
b. Remove the sediment cup and O-ring.
c. Turn the fuel valve to the ON position. Drain the gasoline into a
suitable container.
O-RING
(Replace)
SEDIMENT CUP

9. TRANSPORTING/STORAGE

ON
FUEL VALVE
61

Publicité

Table des Matières
loading

Table des Matières