Honda Power Products TILLER FJ500 Manuel De L'utilisateur page 60

3.Install the outer rotaries with the "R" (right rotary) mark or "L" (left
rotary) mark facing toward the inner rotary as shown.
4.Insert the rotary pins B and set the retaining pins.
5.Install the side disk, then insert the rotary pin B and set the retaining
pin.
6.The opposite side rotary/side disk is similar.
LEFT OUTER ROTARY
(Viewed from inner rotary side)
"L" MARK
RETAINING PIN (3)
LEFT INNER ROTARY
RIGHT OUTER ROTARY
(Viewed from inner rotary side)
ROTATION
DIRECTION
ROTARY PIN B (3)
"R" MARK
LEFT OUTER ROTARIES
SIDE DISK
57