Velleman VLEVP4 Mode D'emploi page 6

Battery Charging Current Configuration Settings
default
0.5 A
1.0 A
Note:
 The VLEVP4 features 4 charging channels. Each channel is independent
and there is no influence to any channel while charging and monitoring
batteries.
Tips
 While in charging mode, hold the current button pressed to switch off
the LCD screen.
 Choose the most suitable charge current for your batteries:
0.25 A: 10440 - 18700 Li-ion batteries
o
0.5 A: 18650 - 26650 Li-ion batteries with capacity ≥ 2500 mAh
o
1.0 A: Li-ion batteries with capacity ≥ 2000 mAh (1.0 A is the large
o
charging current for fast charging mode)
Remarks
 The VLEVP4 has an integrated short-circuit protection to protect the
charger if a short-circuit occurs in a battery. Note that this short-circuit
protection protects the charger and does not prevent batteries from
short-circuiting internally.
 The VLEVP4 is only for use with 3.6 V / 3.7 V rechargeable Li-ion
batteries. Charging other battery types may be hazardous, and can
damage the batteries and charger.
 The VLEVP4 features battery charging current configure settings. Please
note, that while there is no battery in CH2 and CH3, only CH1 and CH4
can get 1.0 A charging current. As long as there is any battery in CH2
or CH3, the charging current will be 0.5 A for the 4 channels. The
current button can only adjust the charging current to a lower one.
V. 01 – 06/02/2015
CH1 CH2 CH3
Slot with battery
Slot without battery
VLEVP4
CH4
(Note: only 0.5 A or 0.25 A
1.0 A0.5 A0.25 A1.0 A
(Note: you can select 1.0 A
6
0.5 A
ꜜ
0.25 A
ꜜ
0.5 A
can be selected)
or 0.5 A or 0.25 A)
©Velleman nv