Programming Menu Items - Ovention Double MiLO Manuel D'installation Et D'utilisation

OPERATION

Programming Menu Items

Use the following procedures to edit, create, or delete menu
items and categories. These procedures require access to
password-protected screens and should be performed by
authorized personnel only.
NOTE: The USB port allows the uploading of pre-programmed
menu items from an external USB drive. Refer to the
"Uploading from a USB Drive" procedure in this section
for details.
1. From the Main Recipes screen, touch the "up" arrow.
• A password keypad will appear on the touchscreen.
2. Input the password using the keypad, and touch ENTER.
• The Admin Mode screen will appear on the touchscreen.
Touch to access
Edit Setpoint Data screen.
Touch to return to
Main Recipes screen.
500 F
Back
Maint
Touch to access
USB Functions
Touch to access
Maintenance Mode
screen.
Admin Mode Screen
3. Touch RECIPES to access the Recipe Development
screen.
Touch to create
a new menu item/
category.
Touch to edit an
existing menu item/
category.
Recipe Development Screen
4. Touch NEW, EDIT, or DELETE on the Recipe Development
screen, depending on the desired function. Then, refer to
the appropriate procedure in this section.
Touch to access
Recipe Development
screen.
ADMIN MODE
Temps Recipes
USB Logs
screen.
Touch to access
Logs Detail
screen.
Touch to delete a
menu item/category.
Touch to return
to Admin Mode
screen
Creating New Menu Items/Categories
1. After touching NEW on the Recipe Development screen,
the New Recipe/Category screen will appear. This screen
will look like the Main Recipes Screen.
2. Touch an empty box. The "Select Type" window will
appear. If no empty boxes are available, touch the "down"
arrow to scroll to the next screen.
3. Touch RECIPE to create a new
menu item or CATEGORY to
create a new category.
• For new menu items, the
New Recipe Settings Screen
will appear.
• For new categories, a keypad appears. Type the name
of the new category, then touch ENTER. The Recipe
Development screen reappears. To add menu items to
the new category:
a. Touch NEW on the Recipe Development screen.
b. Touch the new category that is now available on the
New Recipe/Category screen.
c. Touch an empty box in the new category and continue
with the next step in this procedure.
Touch to save settings, cancel settings,
perform a Test Cook, and return to
Recipe Development screen.
Touch to access settings for
New Recipe Settings Screen
4. Touch each "setting" box on the New Recipe Settings
screen to edit the corresponding setting. Settings include
item name, blower percentage, infrared (IR) top intensity,
IR bottom intensity, cook duration, and cook temperature.
• Touching the item name, blower percentage, cook
duration, or cook temperature "setting" boxes will bring
up a keypad specific to the setting. Enter the desired
value using the keypad, then touch ENTER to return to
the New Recipe Settings screen.
• Touching the IR Top or IR Bottom "setting" boxes will
toggle the setting between OFF, LOW, and HIGH.
• Menu item names can have up to 16 characters.
• Touch the "down" arrow to access the settings for
stages 2 and 3. Each menu item can be programmed to
have up to three stages, depending on the food product.
Stages are programmed with unique settings to create
a customized cooking sequence for the menu item.
NOTE: It is not necessary to create stages for a menu item if it
is not required by the food product. If unique stages are
not required, leave the cook duration setting for stages
2 and 3 at zero.
10
English
next stage, if required.
Form No. OVMILOM-0817