Declaration Of Conformity; Technical Data; Noise/Vibration Information - Bosch PSR 14,4 LI-2 Notice Originale

18 | English

Declaration of Conformity

We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 89/336/EEC,
98/37/EC (until Dec. 28, 2009), 2006/42/EG
(from Dec. 29, 2009 on).

Technical Data

Cordless Screwdriver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screwdriving application ac-
cording to ISO 5393
Max. screw dia.
Max. drilling dia.
– Steel
– Wood
Chuck clamping range
Weight according to EPTA-Procedure 01/2003
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.

Noise/Vibration Information

Measured values
EN 60745.
Typically the A-weighted sound pressure level of
the product is 70 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
2
a =2.5 m/s , Uncertainty K =1.0 m/s
h
Screwdriving: Vibration
2
a =2.5 m/s , Uncertainty K =1.0 m/s
h
2 609 002 432 | (3.7.07)
determined according
2
,
emission
2
.
Dr. Egbert Schneider
Senior Vice President
Engineering
06.06.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
rpm
rpm
Nm
mm
mm
mm
mm
WARNING
to
been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another.
The vibration emission level will vary because of
the ways in which a power tool can be used and
may increase above the level given in this infor-
mation sheet. This could lead to a significant un-
derestimate of exposure when the tool is used
regularly in such a way.
Note: To be accurate, an estimation of the level
of exposure to vibration experienced during a giv-
en period of work should also take into account
value
the times when the tool is switched off and when
it is running but not actually doing the job. This
may significantly reduce the exposure level over
the total working period.
Dr. Eckerhard Strötgen
Head of Product
Certification
PSR 14,4 LI-2
3 603 J56 4..
V= 14.4
0 – 370
0 – 1150
30/17
8
10
30
0 – 10
kg 1.35
The vibration emission level given
in this information sheet has
PSR 18 LI-2
3 603 J56 3..
18
0 – 400
0 – 1250
36/22
8
10
35
0 – 10
1.45
Bosch Power Tools