Cleaning And Maintenance - EUROM VT9 Manuel D'utilisation

Masquer les pouces Voir aussi pour VT9:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

11. Now mount the fan unit over the adjustable standard part and clamp it firmly
tight with the fastening bolt.
Operation
The fans can be set to different speeds: The VT9 BLANC has two settings; the VT12
BLANC, VT16 BLANC and VS16 BLANC have three settings. All types of fan are
equipped with an oscillation function (45°).
If
- the fan has been fully assembled
- all connections have been properly secured
- all safety guidelines have been taken into account
you can use the fan.
 Insert the plug into the socket.
 Select setting: 0=off, 1=standard, 2=strong and 3=extra strong. The fan will now
begin to work.
 If required, you may now depress the oscillation button on top of the motor: the
fan will now begin to oscillate through an angle of 45°. Depressing and releasing
this button will turn the oscillation function off.
 If you would like to angle the fan upwards or downwards, the motor block can be
angled further up or down in relation to the foot. Before doing so, however, turn
off the fan and remove the plug from the socket!
Press the 0 button to switch the fan off. If you wish to turn the device off for longer
than just a few minutes, you must also remove the plug from the socket.

Cleaning and maintenance

Switch the fan off and remove the plug from the socket if you wish to clean the device
or perform maintenance.
The fan only needs general, exterior maintenance. Dust it regularly with a soft cloth
or duster or use a vacuum cleaner with a soft brush to clean. If it is very dirty, open
the grille and clean grilles and blades using a soft, damp cloth and a mild household
cleaning agent. Dry everything thoroughly and allow the fan to dry properly before
reassembling and using again. Ensure that water does not come into contact with
anything other than the grille and blades. Never rinse or spray the fan! Don not use
any spray.
In order to prevent material discolouration or deformities, never use aggressive or
corrosive (cleaning) products.
If the fan is to be stored at the end of the season, repack in its original packaging:
this offers the best protection. Store it in a safe and dry place that is not subject to
extremes of heat or cold.
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vt12Vt16Vs16385427385434385441 ... Afficher tout

Table des Matières