Flowserve ISC2 Série Instructions De Montage page 6

ATTENTION: This means that important information is pointed out
ATTENTION:
Please read these instructions carefully. Installation in accordance with
the following instructions will contribute to long and trouble free run-
ning of the mechanical seal.
For related mechanical seal auxiliary equipment (reservoirs, coolers,
etc.), separate instructions will be provided.
The ultimate user must ensure that personnel assigned to handle, install
and run the mechanical seal and related equipment is well acquainted
with the design and operating requirements of such equipment.
For this personnel it may be required to wear protective clothing
as per the plant's safety regulations.
Damage to any of the seal components and in particular the
faces may cause (excessive) leakage in liquid or gas form. The
degree of hazard depends on the sealed product and may have
an effect on people and/or the environment. Components coming
into contact with leakage must be corrosion resistant or suitably
protected.
EXPLOSION PROTECTION – This means that failure to observe
these instructions will involve the risk of explosion in potentially
explosive environments which can cause harm to persons and /
or considerable damage to property.
Plant regulations concerning work safety, accident prevention and pol-
lution must be strictly adhered to.
6
that may also be overlooked by skilled personnel. The
information can be important to avoid personal injury
or material damage.