Operating Elements And Connections; Front Side; Rear Panel; Remote Control - IMG STAGELINE DPR-10 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Please unfold page 3. Then you can always
GB
see the operating elements and connec-
tions described.
1 Operating Elements
and Connections

1.1 Front side

1 USB interface for inserting a USB stick
2 Display
3 Button DEL for deleting individual titles
(
chapter 5.13)
4 Button REC for the recording and copying
functions (
5 Button FUNC for switching the signal source;
indication in the display:
USB
= USB connection (1)
CARD = slot for inserting the card (9)
AUX
= input AUX INPUT (17)
6 Button
[STOP*] to stop the playing
7 Button
replay and pause
8 Buttons
for the title selection and the fast forward and
reverse
Title selection
Each time the button
pressed, the unit advances one title; by press-
ing the button
to the title beginning and with each further
pressing, the unit goes back one more title.
Fast forward/reverse
For the fast forward, keep the button
[UP/CUE] pressed, for the reverse the but-
ton
[DOWN/REV].
9 Slot for inserting an SD / MMC card
10 Infrared sensor for the remote control signals
11 POWER switch
12 Buttons VOL for adjusting the output level of
the jacks OUTPUT (16)
13 Buttons FOLDER for selecting the first title in
another folder:
With the button ▶ the unit goes to the first title
of the next folder and with the button ◀ to the
first title of the previous folder.
14 Numerical keys for direct selection of a title, e. g.
Title No. Buttons
4
4,
27
2, 7,
135
1, 3, 5,
*Lettering on the remote control
10
chapters 5.11 and 5.12)
[PLAY/ PAUSE*] to switch between
[DOWN / REV*] and
[DOWN/REV], the unit goes
[PLAY/ PAUSE*]

1.2 Rear panel

15 Jack 12 V for the 12 V operating voltage
centre contact = positive pole
required low voltage plug 5.5/2.1 mm (outside/
inside diameter)
16 Audio output with line level
(left and right channels)
17 Recording input AUX INPUT for connecting a
signal source with line output (e. g. CD player,
radio)

1.3 Remote control

3 – 8 and 12 – 14
These buttons have the same functions as the
buttons on the unit.
18 Button FIND
– Press shortly for the first time: alphabetic
– Press shortly for the second time: folder
– Press shortly for the third time: search func-
– Keep it pressed for 1 sec.: the display is
[UP/ CUE*]
19 Button REPEAT for the repeat functions
[UP/CUE] is
1
st
2
nd
3
rd
4
th
20 Button MUTE for muting
21 Button PROG for switching to the program-
ming mode to compile an individual title se-
quence (
22 Button RANDOM for playing the titles in a ran-
dom sequence (indication RANDOM)
23 Button INTRO for playing the beginning of
each title for 10 sec. (indication INTRO)
search of a title (
chapter 5.4.3)
search function (
chapter 5.4.4)
tion off
switched between the indication of title in-
formation (file, title, artist, album) and play-
ing time (title No., min. : sec.)
pressing of button (indication REPEAT)
The present title is continuously repeated.
pressing of button (indication REPEAT ALL)
All titles on the storage medium are contin-
uously repeated.
pressing of button
(indication REPEAT ALBUM)
All titles in the selected folder are continu-
ously repeated.
pressing of button
(indication REPEAT is extinguished)
The repeat function is switched off.
chapter 5.10)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

17.2740

Table des Matières