NGM Forward Prime Guide Rapide page 25

Charging the battery:
Charge the battery before starting to use the device. Use the supplied USB cable and the
USB connector on the top side of the phone. Connect the charger to a provided wall socket
adaptor and then the device to the USB cable. You can also charge the phone by
connecting it with the PC USB port, but in this case it will charge more slowly. When the
battery is charging, an animated icon on screen will show the charging progress if the
phone is on. Once the battery icon is filled, it is fully charged and the phone can be
disconnected from the grid.
Warning: Do not connect the phone to a booting-up or running down PC to avoid voltage
jumps. To preserve the functionality of the product and the integrity of the guarantee, we
recommend the use of NGM original chargers. Please charge the battery indoors, in a dry
and favorable environment. It's normal for the battery to get slightly warm during the
charging process. The battery will reach its full capacity when cycled several times.
Turn on, turn off and standby
To turn on the phone, press and hold the power on/off key. To turn off your device, press
and hold the same key and confirm by selecting "Shutdown". A quick pressure sets the
phone into stand-by mode (screen off) or allows you to go back to the lock screen (see
below).
ENGLISH 25