LENCO BAR-013 Mode D'emploi page 7

Bluetooth Speaker as you wanted.
E. Auto Re-connect with Paired Device and New Pairing
1. Every time you turn on the Bluetooth speaker and enter into
Bluetooth mode; it will firstly searching for the mobile device, which
has been paired previously and still in record. The Bluetooth Speaker
will re-connect this mobile device as priority if it is in Bluetooth
searching device mode.
2. If not found in some seconds, the Bluetooth Speaker then is turn into
new pairing mode internally.
3. Now you can process for new mobile device pair. (refer to item D.3~6
methods)
F. Bluetooth Music Playing Control Function
1. In playing music, press "
the music press it again.
2. Press and hold the "
3. Press and hold the "
4. When maximum or minimum volume is reached, a series of tones will
sound.
5. Press once the "
6. Press once the "
G. Time Setting
1. Power on the bluetooth speaker, press the "M button (2)" to switch to
time mode.
2. Press and hold the "M button (2)" to go to hour set, the number of
hour will blink on LED display.
3. Press or pressing the "
time as current time.
4. Short press the "
for Minute set. The number of minute will blink on LED display;
5. Press or pressing the "
minute time as current time.
6. Short press the "
7. The time set is completed and clock time is showing on LED display.
(6)" button to pause the music. To resume
(7)" button to increase the volume level.
(5)" button to decrease the volume level.
(7)" button to go to the next music.
(5)" button to go to the previous music.
(5)" or "
(7)" button for adjusting the hour
(6)" button to confirm the hour time set and go
(5)" or "
(7)" button for adjusting the
(6)" button to confirm the minute time set.
7