LENCO BAR-013 Mode D'emploi page 6

Radio bluetooth de salle de bain et de cuisine avec minuterie
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

2. To recharge the built-in battery:
 Connect the Bluetooth Speaker's "Micro USB socket (9)" with the
Computer's USB port through USB cable. The battery icon will flash in
the lower right corner of the "LED (4)" screen, it is in charging.
 Disconnect the USB cable when it is done.
C. Power On and Pairing
This product has a bluetooth reception function, you can not transmit
any bluetooth sound with it: this means that you can receive wirelessly a
bluetooth sound signal from an external source like a smartphone.
1. Press and hold the "
tones will sound. If it is in clock mode, press the "M button (2)" to
switch to Bluetooth mode, the " " icon is fast blinking on display.
2. Then activate the Bluetooth function in your mobile device (such as
Mobile Phone or Personal Computer), the device will enter to
Bluetooth searching mode automatically, if not, tap the related
selection to manually enter to searching mode. (refer to your device's
manual when necessary)
3. Your mobile device should show "Lenco BAR-013" in list, and then
select it for pairing. Waiting for some seconds and you will see
connected message as shown on your mobile device. (For some
Bluetooth devices, you may need to input "0000" as pairing password)
4. If pairing is successful, the " " icon will constantly show on the
display.
5. Now, you can start to music play from the mobile device by its music
player program.
6. Press and hold the "
not in use.
D. Disconnect from Paired Device
1. Press and hold the "
Pairing" mode, the paired device will be disconnected.
2. Or, you can choose "Disconnect" from Bluetooth paired device list on
your mobile device.
3. In this case; the Bluetooth Speaker will turn back into "Searching /
Pairing" mode in seconds, a series of tones will sound and the " "
icon is fast blinking on display.
4. Now, you can process for new mobile device pair or power off the
(1)" button to turn on the device. A series of
(1)" button to turn off the device when it is
(6)" button to switch to new "Searching /
6

Publicité

Table des Matières
loading

Table des Matières