Device Operation; Lock - eQ-3 eqiva Key-BLE Mode D'emploi

Operating modes:
Normal mode:
After operation, the device remains in its last status
(locked or unlocked). If the function "open" has
been selected, the device remains in the status
"unlocked".
Automatic closing:
The door is locked automatically during a previously
set period of time.
Permanent closing:
The door is always locked automatically shortly after
operation.
6.2

Device operation

6.2.1

Lock

The lock bolt moves to the previously defined locking po-
sition. Upon completion of the procedure, an audio signal
is emitted on the lock actuator. To lock the door manually
with the device, please proceed as follows:
• Press the button "Lock" (E) on the lock actuator one
time briefly.
Operation
41