Babyauto TownFix123 Notice D'instruction page 22

2. SEAT PARTS AND FITTINGS
A. Cover.
B. Ergo seat cushion for group 1.
C. Harness straps.
D. Harness pads.
E. Locking buckle.
F. Childs´s seat base.
G. Harness adjuster strap.
H. Armrest.
I. Headrest adjuster lever.
J. Belt hook.
K. Harness strap slot.
L. Metal harness connector.
M. ISOCLICK Anchors.
N. ISOCLICK button to uninstall the system (Red)
O. Backrest.
3. ISOCLICK ANCHORS INSTALLATION. GROUPS 1, 2 AND 3.
WARNING
To install the chair first install the ISOCLICK anchors and then each
group according to its individual installation.
1. Remove the anchorage rod protectors from the vehicle seat if
present (3.1).
2. Extract the ISOCKLICK Anchors
180 degrees from the base of the chair (3.2).
3. Installez les ancrages à travers les rainures de la tapisserie entre
le dossier et le siège du véhicule jusqu'à entendre un "Click" qui
signifie que les ancrages sont correctement installés et verrouillés
avec le siège du véhicule (3.3, 3.4 y 3.5).
4. To uninstall ISOCLICK anchors press the red button
ISOCLICK anchors to extract the chair from the vehicle seat.
22 Child restraint system
To install the chair it is first necessary
to install the ISOCLICK anchor.
M from the chair by rotating them
N and pull the
TOWNFIX123