Cleaning And Care - WMF LINEO Mode D'emploi

Turbo button
Should you require a higher speed level for a short period of time while processing food, you can also
press the turbo button. The device works at maximum speed for as long as this button is pressed.

Cleaning and care

Remove the mains plug immediately after use.
Clean the device as soon as possible after use. Do not allow any food to dry on the device or mixing
tools.
The mixing tools can only be removed once the device is switched off (position 0).
Push the eject button to remove the mixing tools.
Clean the mixing tools in a warm washing up liquid solution or in the cutlery compartment of the
dishwasher.
You can soak food residue dried onto the mixing tools in a lukewarm washing up liquid solution before
cleaning.
CAUTION: Never clean the device or mains cable in the dishwasher!
Never immerse the device, mains cable or mains plug in water or other liquids, never pour water or
other liquids over the device or set the device on wet or damp surfaces.
Use a damp, not dripping, cloth to wipe the device and mains cable.
Carefully dry the device and mixing tools. Allow the components to air dry for a few minutes.
Do not use any abrasive cleaning agents.
To store, the cable can be wrapped around the device and fastened with a cable clip.
9