Epson TM-L60II Manuel D'utilisation page 9

TM-L60II Specifications
Print method
Dot density
Print direction
Print width
Characters per line Thermal paper: 32 (Font A), 42 (Font B); Label paper: 30 (Font A), 40 (Font B)
Character spacing
Print speed
Paper feed speed
Line spacing
Character sets
Character matrix
Character size
Thermal paper type Specified: Nakagawa Seisakujo, NTP080-80
Thermal label
paper type
Interface
(compatible)
Receive buffer
DKD function
Electrical
*2
characteristics
Reliability
Temperature
Humidity
Overall dimensions 124 × 123 × 201 mm {4.88 × 4.84 × 7.91"} (H × W × D)
Weight (mass)
*1: In label mode, print speed above applies only to printing in the area of a single label.
*2: Be sure to use a safety-standards-applied power source that meets the following specifications.
Rated output: 24 V/2.0 A or more, Maximum output: 240 VA or less
Thermal line printing
180 dpi × 180 dpi (dpi = dots per 25.4 mm, dots per inch)
Unidirectional with friction feed
54.19 mm {2.13"}, 384-dot positions
Font A: 0.28 mm {0.01"} (2 dots); Font B: 0.28 mm {0.01"} (2 dots).
Approx.12 Iines/sec. (4.23 mm {1/6"} feed)
Approx. 28 mm/sec. {1.1"/sec.} printing a ladder bar code.
Print speed depends on transmission speed and control commands.
Approx. 50 mm/sec. {2"/sec.}
4.2 mm {1/6"} default. Programmable by command (0.07 mm {1/360"} units).
Alphanumeric: 95; enlarged graphics: 128 × 7 pages (including 1 space
page); international: 32
Font A (default): 12 × 24; Font B: 9 × 24 (both include 2-dot horizontal space)
Font A: 1.41 × 3.39 mm {0.06 × 0.13"} (W × H);
Font B: 0.99 × 3.39 mm {0.04 × 0.13"} (W × H)
(Original: Nippon Paper Industries Co., Ltd.,TF50KS-E)
Specified 25.4 mm {1"} long: Nakagawa Seisakujo, NTL060-80
(Original: Nippon Paper Industries Co., Ltd., HD75)
RS-232/Bidirectional parallel
Either 4 KB or 45 bytes
2 drives
Supply voltage: 24 VDC ± 7%
Current consumption:
Operating: Mean: Approx. 1.0A, Peak: Approx. 5.0A
Standby: Mean: Approx. 0.1A
Life: Thermal paper: 12,000,000 lines
Thermal labels:
MTBF: 180,000 hours
MCBF: Thermal paper: 29,000,000 lines
Thermal labels:
Operating: 5 to 40°C {41 to 104°F}
Storage: –10 to 50°C {14 to 122°F} (except paper)
Operating: 30 to 85% (non-condensing)
Storage: 30 to 90% (non-condensing, except paper)
Approximately 0.8 kg {1.76 lb}
*1
; 50 mm/sec. {2"/sec.}
*1
5,000,000 lines (800,000 25.4 mm {1"} long labels)
12,000,000 lines (2,000,000 25.4 mm {1"} long labels)
TM-L60II User's Manual 9
English
*1