Power Failure; Door Alarm - Sharp SJ-WS320T Mode D'emploi

Power Failure

While this feature is operating, it will indicate the rise of
inside temperature caused by power failure or something.
1
Press the select button and select the power failure
icon.
(The icon is orange.)
2
Press the button. [
3
Press the button.
To cancel operation
It is the same method as starting operation.
Press the button in step 2.
Indication of power failure
• At the time of repower, if the inside temperature of the
refrigerator and freezer compartment becomes as follows,
R: more than 7 °C, F: more than -10
will blink slowly.
Blink slowly
• Check the quality of food before you eat.
How to cancel the indicator blink
Press the button while the icons are blinking.
Flashing
: ON, : OFF ]
°C , power failure icon

Door Alarm

• When the refrigerator door is left open, the door alarm will
sound.
• The door alarm will sound in 1minute after opening the
door and again after 1 minute (once in each case).
• If the door is left open for approx. 3 minutes, the alarm will
sound continuously.
• At first, door alarm is set "ON".
To cancel operation
1
Press the select button and select the door alarm
indication like the below figure.
Flashing
Door alarm indication
2
Press the button. [
3
Press the button.
The indication will disappear.
To start operation
It is the same method as canceling operation.
Press the button in step 2.
1
2 3
: ON, : OFF ]
It shows Door alarm "ON".
11