Velleman WS805 Mode D'emploi page 2

5. Temperature/Humidity Read-Out
Press MODE when the device is in the normal display mode to display room temperature ("TEMP IN"), outside
temperature ("TEMP OUT"), relative humidity ("HUMIDITY") or the exact time in that order.
If the temperature is displayed in the normal display mode :
- press "-" to select either °C or °F.
- press the MAX/MIN button to display the max. inside or outside temperature for 5 seconds and press again to
display the min. inside or outside temperature.
- press the CLEAR button to clear the memory for min. and max. indoor/outdoor temperature.
Remark : The message "
6. Weather Forecast
If you want a more precise weather forecast for the next 12 to 24 hours, you will have to select the correct weather
situation from the list below. Consequently, the device will warn you if any weather changes are to be expected. You
can select one of the following weather conditions :
SUNNY
Select the current weather situation as follows : Hold the "-" button for two seconds in the normal display mode until
the weather icon on the display starts to flash. Select the various weather patterns with the "+" button in the order
mentioned above : sunny - slightly cloudy - cloudy - rainy- stormy. Press "-" again to confirm your choice. The device
automatically returns to the normal display mode.
" Storm Alarm
When the WS805 detects an approaching storm, the icons for rainy and cloudy weather will flash continuously. The
backlight will be lit for 5 seconds and the alarm will sound for 10 seconds (this procedure is repeated three times).
Press an arbitrary button to deactivate the alarm.
" Pressure Trend
: the weather is stable
: weather conditions are improving
: weather conditions are worsening
WS805
Lo
" is displayed as "outside temperature" if the outdoor sensor is not connected.
SLIGHTLY
CLOUDY CLOUDY
2
RAINY STORMY
VELLEMAN