Energy Saving Tips - Dometic GROUP WAECO CoolMatic MDC065 Notice D'utilisation

Operation
7 Operation
I
NOTE
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the "Cleaning and maintenance" on
page 35).
7.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 Allow food to cool down first before placing it in the device.
 Do not open the cooling device more often than necessary.
 Do not leave the door open for longer than necessary.
 Defrost the cooling device as soon as a layer of ice forms.
 Avoid unnecessarily low temperatures.
 Clean the condenser of dust impurities at regular intervals.
7.2 Using the cooling device
The fridge device conserves fresh foodstuffs. You can also conserve frozen
foodstuffs in the freezer compartment.
A
NOTICE!
Ensure that food or liquids in glass containers are not excessively
refrigerated.
Liquids expand when they freeze and can thus destroy the glass
containers.
➤ Switch the cooling device on by turning the knob (fig. 1 A, page 3) to the
right.
I
NOTE
After switching on, the cooling device requires approx. 60 s until
the compressor starts up.
A
NOTICE!
Ensure that the objects placed in the cooling device are suitable
for cooling to the selected temperature.
32
MDC065(K), MDC090(K)
EN