Operation; Energy Saving Tips - Dometic GROUP WAECO MyFridge MF05 Notice D'utilisation

MF05, MF15
6

Operation

I
NOTE
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the chapter "Cleaning and mainte-
nance" on page 22).
6.1

Energy saving tips

 Choose a well ventilated installation location which is protected against
direct sunlight.
 If you want to set an increased energy efficiency and a limited cooling
capacity for the cooler unit, use the cooler's ECO mode.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
6.2 Using the cooling device
A
NOTICE! Risk of damage
 Ensure that the objects or goods placed in the cooling device
are suitable for cooling or warming to the selected tempera-
ture.
 Ensure that food or liquids in glass containers are not exces-
sively refrigerated. Liquids expand when they freeze and can
therefore destroy glass containers.
 Ensure that your cooler is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
➤ Place the refrigerator on a firm base.
Ensure that the ventilation slots are at least 10 cm away from the wall so
that the heat that arises during operation can be drawn off.
➤ Plug the 12 V connection cable (fig. 1 2, page 3) into the DC socket and
also into the cigarette lighter or a 12 V socket ...
or
EN
All manuals and user guides at all-guides.com
Operation
21