General Guidelines; Quick Start; Preparation - Velleman LABPSHH01 Mode D'emploi

3. General Guidelines

Refer to the Velleman
of this manual.
 Familiarise yourself with the functions of the device before actually
using it.
 All modifications of the device are forbidden for safety reasons. Damage
caused by user modifications to the device is not covered by the
warranty.
 Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
 Keep this manual for future reference.
4. Features
 handheld DC switching power supply
 large LCD display for voltage and current
 compact and lightweight design
 adjustable from 0.3-30 V, up to 3.75 A with maximum continuous
power of 50 W
 works in constant voltage and current mode
 2 built-in USB ports (2 x 2 A)
 short-circuit protection
 fuse-protected
 test leads not included

5. Quick Start

5.1 Overview
Refer to the illustrations on page 2 of this manual.
1 current setting
2 voltage setting
3 measured value

5.2 Preparation

Connect the device to the mains to switch it on. The device will start the
self-check process.
V. 03 – 28/10/2016
LABPSHH01
® Service and Quality Warranty on the last pages
4
4 keypad
5 USB ports
6 DC outputs
©Velleman nv