Philips AC4072 Mode D'emploi page 7

- Do not use the appliance in a room with
major temperature changes, as this may cause
condensation inside the appliance.
- The appliance is only intended for household use
under normal operating conditions.
- Do not use the appliance in wet surroundings or in
surroundings with high ambient temperatures, such
as the bathroom, toilet or kitchen.
- The appliance does not remove carbon monoxide
(CO) or radon (Rn). It cannot be used as a safety
device in case of accidents with combustion
processes and hazardous chemicals.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.
Before first use
Placing the filters
The appliance comes with all filters fitted inside, but you have to remove
the packaging of the filters before you can use the appliance. Remove all
filters, unpack them and place them back into the appliance as described
below.
Tip: Place the appliance against a wall for more stability when you remove or
insert filters.
Note: Make sure you insert the filters in the correct position.
1 Place your fingers in the recesses of the side panels and gently pull
the top part of the front panel towards you. Then lift the hooks at
the bottom of the panel out of the bottom of the appliance.
English
5