RAIS/attika VISIO 3-1 NS Manuel D'utilisateur page 107

English
Conversion to self-closing door after the stove has been fitted.
The door is made self-closing by dismantling some of the door's counterweights. On VISIO 1 & 3,
the counterweight is changed on both sides.
36 36
RAIS/
1. Remove the Side Skamol sheet.
2. Remove the access panel.
Access panel.
3. Unscrew the retaining ring (Allen key 2.5mm). Remove the
required number of counterweights, so that the door closes slowly
and at a constant speed. Check its operation.
Retaining ring.
Counterweights.
4. Tighten the retaining ring (Allen key 2.5mm)
Retaining ring.
5. Refit the access panel and side Skamol sheet.
Access panel.
attika
- User manual for VISIO 3-1