Cleaning And Care; Maintenance/Replacement Parts; Moving Parts - RAIS/attika VISIO 3-1 NS Manuel D'utilisateur

English

Cleaning and care

Wood stove and chimney must be inspected by a chimney sweep annually. During
cleaning and care, the stove must be cold.
If the glass is sooty:
• Clean the glass regularly and only when the stove is cold, otherwise the soot will
burn solid.
• Dampen a piece of paper or newspaper, dip it in the ashes and rub the sooty glass.
• Rub with a piece of paper and glass becomes clean.
• Alternatively use glass polish, which can buy from you RAIS distributor.
Clean the exterior with a soft dry cloth or soft brush.
Prior to a new heating season, it should always be checked that the chimney and
smoke gas connector are not blocked.
Inspect the stove interior and exterior for damage, especially seals and the heat insulat-
ing plates (vermiculite).

Maintenance/Replacement Parts

Especially moveable parts are worn down by frequent use. Door seals also become
worn. Only use original spare parts.
We recommend service performed by your dealer after
completion of a heating period.
Combustion chamber lining
The combustion chamber lining protects the body of the wood burning stove against
the heat from the fire. the large temperature fluctuations may result in cracks in the
plates of the combustion chamber lining, which, however do not affect the functional
capacity of the stove. They do not need to be replaced unless long-term use causes
them to crumble.
The plates of the combustion chamber lining are only inserting into the stove, and can
be easily replaced by your dealer or yourself.

Moving parts

Door hinges and door lock should be lubricated when needed. We recommend to use
only our lubricating spray, as the use of other products can lead to the formation of
odours and residues. Contact your dealer to obtain the lubricant.
attika
RAIS/ - User manual for VISIO 3-1
29 29