RAIS/attika VISIO 3-1 NS Manuel D'utilisateur page 106

English
Conversion to a self-closing door beforethe oven is built in.
The door is made self-closing by dismantling some of the door's counterweights. On VISIO 1 & 3,
the counterweight is changed on both sides.
RAIS/
1. Remove the trasport safety and tighten the screws to the coun-
terweight cover
Transport safety.
2. Remove the counterweight cover by pulling it up.
Counterweight cover.
3. Unscrew the retaining ring (Allen key 2.5mm). Remove the
required number of counterweights, so that the door closes slowly
and at a constant speed. Check its operation.
Counterweights
Retaining ring
4. Tighten the retaining ring (Allen key 2.5mm)
Retaining ring
5. Attach the counterweight cover and screw in the screw(s).
Counterweight cover.
attika
- User manual for VISIO 3-1
35 35