PICTURE MEMORY AND SETTINGS
On pages
48-50
you will find an overview of
the structure of the OSD (On Screen Display).
Switching on the screen
If the indoor unit is in standby, you can switch
it on by touching the black screen area. The
camera picture is then displayed, the voice
connection to the outdoor unit is not activa-
ted here, but the sound from the outdoor
unit can be heard.
Once the screen has been activated, the
image memory (only if an SD card has been
inserted), the settings menu and the inter-
com function are available. Touch the back
arrow at the bottom left to switch the indoor
unit to standby mode.
Changing the name of the outdoor unit
Once the indoor unit has been activated by
touching the screen, you can change the
name of the outdoor unit to suit your prefe-
rences. To do this, simply touch the name of
the outdoor unit (A9) and then enter the
desired name. Confirm the entered name
with the Enter key.
Switching between outdoor units
If several outdoor units are connected, you
can switch between them by tapping on the
arrows next to the name of the outdoor unit.
Picture memory
Touch the photo symbol at the bottom right
to view the contents of the picture memory
on the SD card. The following screen displays
a calendar with days on which pictures were
taken highlighted in colour. Touch the corre-
sponding day to view all pictures taken on
the selected day. Use the arrow keys to the
right and left of the picture to switch to the
next or previous picture.
previous picture.
Individual pictures can be deleted by tou-
ching the button with the dustbin symbol.
The image displayed in each case is deleted
without confirmation when the dustbin
symbol is touched. If you want to delete all
stored pictures at once, see the item
"Delete all photos".
Settings
You can access the settings menu if you have
switched on the screen by touching it and
then touch the button with the cogwheels.
42
ENGLISH | VDV-907
GB