Safety; Important Safeguards - Work Sharp E5 Mode D'emploi

SAFETY

IMPORTANT SAFEGUARDS

⚠
READ all safety warnings and all instructions. When using electrical appliances,
WA R N I NG !
basic safety precautions should always be followed. Every user should read these instructions.
⚠
You will be creating incredibly sharp knives and tools with this sharpener. Please
WA R N I NG !
handle them with care. Use caution to avoid cutting yourself.
FOR HOUSEHOLD USE ONLY
Stay alert. This appliance is not to be used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction. Children shall not play with, clean or maintain this appliance.
Close supervision is necessary when any appliance is used by or near children.
Do not let the power cord hang over edge of table or counter.
The appliance is only to be used with the power supply unit provided with the appliance. It
must be supplied at safety extra low voltage corresponding to the marking on the appliance. Only
use the power supply that is provided by the manufacturer with this appliance and that complies with
the safety extra-low voltage (SELV) as marked on the appliance.
For US market, this appliance is to be supplied with a UL-approved "class 2 power supply".
For Canadian market, this appliance is to be supplied with CSA22.2 No. 223 approved power
supply.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the appliance. Keep
cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the
risk of electric shock.
Carefully route the power cord to avoid damage from the knife blades while sharpening.
The ON and OFF indicators for the appliance are designated by the illumination of LEDs on
the appliance Power Switch
Do not use appliance with a damaged cord or plug or after the appliance malfunctions or is
dropped or damaged in any manner. Return appliance to the nearest qualified service center for
examination, repair or electrical or mechanical adjustment. (Type X attachment).
Unplug from outlet when not in use, before putting on or taking off parts, and before
cleaning.
To protect against electrical hazards, do not immerse in water or other liquid. Do not expose to
rain or wet conditions.
Avoid contact with moving parts.
.
3