Genesis GD38B Manuel D'utilisation page 9

OPERATION
WARNING:
Always check that the power supply corresponds to the
voltage on the rating name plate.
WARNING:
Always be sure that the tool is switched off and
unplugged before adjusting, adding accessories, or checking a function on
the tool.
TRIGGER SWITCH ACTION
WARNING:
Before plugging in the tool, always check to see that the
tool is switched off.
LOCK-ON BUTTON
To lock the trigger "ON"
To unlock the trigger,
KEYLESS CHUCK
WARNING:
Always be sure that the tool is switched off and unplugged
before adjusting, adding accessories, or checking a function on the tool.
To tighten the chuck,
To install a drill bit,
WARNING:
Never attempt to operate a bit that is wobbly, unstable, or
broken.
To loosen the chuck
9