Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH (Original instructions)
SPECIFICATIONS
Model
Blade diameter
Hole diameter
Max. Miter angle
Max. Bevel angle
Max. Cutting capacities (H x W) with 216 mm (8-1/2") in diameter
No load speed (RPM)
Laser Type (LS0815FL only)
Dimensions (L x W x H)
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
For Your Own Safety Read
Instruction Manual
Before Operating Tool
Save it for future reference
GENERAL SAFETY
PRECAUTIONS
(For All Tools)
1.
KNOW YOUR POWER TOOL. Read the
owner's manual carefully. Learn the tool's
applications and limitations, as well as the
specific potential hazards peculiar to it.
2.
KEEP GUARDS IN PLACE and in working
order.
3.
REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool
before turning it on.
4.
KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
Miter angle
0°
45°
60° (right)
45° (left)
50 mm x 305 mm
(2" x 12")
50 mm x 215 mm
(2" x 8-1/2")
-
Wavelength 650 nm, Maximum output
USA007-3
5.
DO NOT USE IN DANGEROUS ENVIRONMENT.
Do not use power tools in damp or wet
locations, or expose them to rain. Keep work
area well lighted. Do not use tool in presence
of flammable liquids or gases.
6.
KEEP CHILDREN AWAY. All visitors should be
kept safe distance from work area.
7.
MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
8.
DO NOT FORCE TOOL. It will do the job better
and safer at the rate for which it was designed.
9.
USE RIGHT TOOL. Do not force tool or
attachment to do a job for which it was not
designed.
10. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or
other jewelry which may get caught in moving
parts. Nonslip footwear is recommended.
Wear protective hair covering to contain long
hair.
11.
ALWAYS USE SAFETY GLASSES. Also use
face or dust mask if cutting operation is dusty.
Everyday
resistant lenses, they are NOT safety glasses.
2
LS0815F /LS0815FL
216 mm (8-1/2")
15.88 mm (5/8")
Left 50° Right 60°
Left 48° Right 5°
Bevel angle
5° (right)
60 mm x 305 mm
65 mm x 305 mm
(2-3/8" x 12")
(2-9/16" x 12")
65 mm x 215 mm
-
(2-9/16" x 8-1/2")
65 mm x 150 mm
-
(2-9/16" x 5-7/8")
1mW (Laser Class II)
755 mm x 450 mm x 488 mm
(29-3/4" x 17-3/4" x 19-1/4")
14.1 kg (31.1 lbs)
eyeglasses
only
have
0°
5,000 /min
impact
Publicité
Table des Matières
