Latchways R20 Série Mode D'emploi page 7

Masquer les pouces Voir aussi pour R20 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
Figure 1 / Figure 1 / Abbildung 1 / Afbeelding 1 / Figura 1 / Figura 1
J
I
H
Follow the manufacturers
instructions included with this
equipment at time of shipment. Visit
www.latchways.com for latest version.
MAX DESCENT HEIGHT:
FOR ONE DESCENT ONLY
FOR SINGLE USER ONLY
G
USER WEIGHT:
59 kg (130 lbs) to 140 kg (310 lbs)
F
OPERATING TEMP:
-20ºC to +60ºC (-4ºF to +140ºF)
E
USAGE
1
CHECK THE GROUND BELOW
TO ENSURE DESCENT PATH IS
CLEAR OF OBSTRUCTIONS AND
SHARP EDGES AND A SAFE
LANDING IS POSSIBLE.
2
OPEN FLAP ON RIGHT SHOULDER.
3
PULL CORD SHARPLY.
4
BEND KNEES AND
PREPARE FOR
LANDING.
L
R20 07 2011 ??????
Model Date of manufacture
Modèle Date de fabrication
Modell Herstellungsdatum
Model Productiedatum
Modelo Fecha de fabricación
Modello Data di produzione
L
K
Tel: +44 (0)1380 732700 www.latchways.com
EN 341:2011/1D
EN 361:2002
II 2 G c IIC T3
IP56
20 m / 65 ft
A
EXAMINATION
DATE
7
B
C
CHECK BEFORE
EACH USE
PERIODIC INSPECTION
SHOULD BE CARRIED OUT
BY A COMPETENT PERSON
AT LEAST ANNUALLY.
WARNING!
!
AVOID DESCENDING INTO
ELECTRICAL, THERMAL AND
CHEMICAL SOURCES OR
OTHER HAZARDS.
!
ONLY USE DESCENT LINE
PROVIDED. DO NOT ATTEMPT
TO MODIFY THIS EQUIPMENT.
!
DESCENDER DEVICE IS
FOR RESCUE ONLY. DO NOT
USE FOR OTHER PURPOSES.
ONLY PULL RED RELEASE CORD
IF RESCUE IS REQUIRED.
D

Publicité

Table des Matières
loading

Table des Matières