Dexter power AC 06 Traduction Du Manuel D'origine page 5

Manufacturer:
Scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Strasse 69
D-89335 Ichenhausen/Germany
Dear Customer,
We wish you much pleasure and success with your new
Dexter machine.
Note:
In accordance with valid product liability laws, the
manufacturer of this device shall not be responsible for
damage to and from this device which results from:
Improper care.
Non-compliance with the Operating Instructions.
Repairs made by unauthorized persons.
The installation and use of any parts which are not original
replacement parts.
Improper use and application.
Failure of the electrical system as a result of non-
compliance with the legal and applicable electrical
directives and VDE regulations 0100, DIN 57113 / VDE
0113.
We recommend
that you read through the entire operating instructions
before putting the compressor into operation.
m
Read the Operating Instructions:
Carefully read the Operating Instructions before setting
up the compressor or putting it into operation, or before
doing any adjustment or maintenance work.
Dangerous electrical voltage
Attention: Before doing any adjustment, maintenance or
cleaning work on the compressor, switch off the power
supply.
Danger emanating from hot surfaces
Attention: The compressor contains some parts that can
get very hot.
Danger through sudden start
Attention: After failure of electric power, the compressor
can suddenly restart.
Warning:
The pressure control has been set in the works for
maximum operating safety. Do not change the given
setting.
Before assembly and putting into operation, read the
entire Operating Instructions.
These Operating Instructions are to assist you in getting
to know your machine and utilize its proper applications.
The Operating Instructions contain important notes on
how you work with the machine safely, expertly, and
economically, and how you can avoid hazards, save
repair costs, reduce downtime, and increase the reliability
and service life of the machine.
In addition to the safety requirements contained in these
Operating Instructions, you must be careful to observe
your country's applicable regulations.
The Operating Instructions must always be near the
machine. Put them in a plastic folder to protect them from
international 5