Additional Safety Instructions; Safety Instructions For Working With Compressed Air And Blasting Guns - Dexter power AC 06 Traduction Du Manuel D'origine

Table des Matières

Publicité

16 Important!
– For your own safety you must only use the acces-
sories and additional units listed in the operating
instructions or recommended or specified by the
manufacturer. The use of mounted tools or accesso-
ries other than those recommended in the operat-
ing instructions or catalog may place your personal
safety at risk.
17 Noise
– Wear ear muffs when you use the compressor.
18 Replacing the power cable
– To prevent hazards, leave the replacement of dam-
aged power cables strictly to the manufacturer or a
qualified electrician. There is a risk of electric shock!
19 Inflating tires
– Directly after inflating tires, check the pressure with
a suitable pressure gauge, for example at your filling
station.
20 Roadworthy compressors for building site operations
– Make sure that all lines and fittings are suitable for
the maximum permissible operating pressure of the
compressor.
21 Place of installation
– Set up the compressor on an even surface.

ADDITIONAL SAFETY INSTRUCTIONS

Safety instructions for working with compressed
air and blasting guns
• The compressor pump and lines can become very hot
during operation. Touching these parts will burn you.
• The air which is sucked in by the compressor must
be kept free of impurities that could cause fires or
explosions in the compressor pump.
• When releasing the hose coupling, hold the hose
coupling piece with your hand. This way, you can
protect yourself against injury from the rebounding
hose.
• Wear safety goggles when working with the blow-out
pistol. Foreign bodies or blown off parts can easily
cause injuries.
• Do not blow at people with the blow-out pistol and
do not clean clothes while being worn. Risk of injury!
international 13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

3906112953

Table des Matières