Fermax Kit Way Manuel D'installation Et Utilisation page 33

12. Monitor Parameter Setting
12.1 How to enter the installation setting page
Monitor Intercom Playback
Call Record Do not
Disturb
1. Touch icon on main menu
page, then select "About" item.
INSTALLER SETUP
12.2 How to set date and time format
The system off ers two methods of date and time.
The code number of 8008 is used to set the date format as month/date/year.
The code number of 8009 is used to set the date format as date/month/year.
The code number of 8012 is used to set the time format as 12 hour system.
The code number of 8013 is used to set the time format as 24 hour system.
12.3 How to set the unlock parameter
Door-lock type:
There are two working modes:
1. Door opener of Normal working: Unblocking mode = 0 (by default). The door remains
open while the door opener is supplied.
2. Door opener of Inverted working: Unblocking mode = 1.
The door remains open while the door opener is not supplied.
Introducing the number 8010 the unblocking mode 0 is established.
Introducing the number 8011 the unblocking mode 1 is established.
Unlock time:
The unlock time can be changed by yourself at any time.it can be set from 1 to 99
seconds.
The code number from 8401 to 8499 are used to set the unlock time to 1~ 99 seconds.
Close
123
3. Access to a new screen that has a keypad to
introduce the wished data. In following chapters
the available and possile settings will be
explained.
p g
About
Local Address 00.00
AUTO
Video Standard
00.02.09
System Version
1.3
Display Driver
1.0
Font
UI 1.0
2. Touch UNLOCK button
and hold for 2s.
-12-