Operation; Using The Stroller; Using The Parking Brake - Britax B-READY Guide De L'utilisateur

Operation

Using the Stroller

IMPORTANT:
• Before and during use, always make sure the child's hands and feet
are away from wheels.
• Protect stroller when transporting and shipping to prevent damage
to stroller and stroller components. Check closely for damage after
transporting and shipping.
Folding the Stroller
IMPORTANT:
• Always apply brake and remove children before folding the stroller.
• Keep both hands on the stroller handle until the chassis lock fully engages.
1. Pull up both frame release levers
located just below the stroller handle,
and step back while guiding stroller
downward.
2. Continue folding until the chassis lock
engages.
NOTE: You may need to compress the
frame to engage the chassis lock.
NOTE: Ensure the chassis lock is
engaged when stroller is stored.
12
Unfolding the Stroller
1. Push the release on the chassis lock
and open the frame.
2. Lift the handle until frame locks into
upright position.
NOTE: After stroller is upright, push
down on handle to make sure frame is
locked in open position.

Using the Parking Brake

1. To engage, step on the brake pedal
until the indicator window changes to
red.
NOTE: Pressing the brake locks both
back wheels.
NOTE: After setting the brake, check
that the brake is set properly by
attempting to roll the stroller forward
and backward. If the stroller will not
roll, the brake is set properly.
2. To disengage, step on the brake
pedal until the indicator window
changes to green.
13