Britax B-READY Guide De L'utilisateur page 6

Assembly
Stroller Frame
1. Press chassis lock lever and open the
frame.
2. Lift handle until frame locks into upright
position.
NOTE: After stroller is upright, push down
on handle to make sure frame is locked in
open position.
Front Wheels
Installing the Front Wheels
1. Slide front wheel mounting pins into
the housings on the frame until they
lock into place.
2. Pull wheel to ensure that it is secure.
6
Removing the Front Wheels
1. Push the button on the front of the
Rear Wheels
Installing the Rear Wheels
1. Hold in the release button in the center
2. Pull wheel to ensure that it is secure.
Removing the Rear Wheels
1. Press and hold the release button in
CLICK
front wheel housing toward the outside
frame of the stroller and pull the wheel
from the stroller.
of the wheel and slide the mounting pin
into the housing on the rear axle.
the center of the wheel and pull away
from the wheel housing.
7