Using The Harness - Britax B-READY Guide De L'utilisateur

Using the Harness

IMPORTANT: Shoulder and waist straps separate for care and
maintenance, but should always be used together to secure your
child.
1. Align the tongues on the waist straps
with the retainers of the shoulder
straps and slide through until they lock
into place.
2. Insert the tongues into the buckle
assembly until a click is heard.
Adjusting the Harness
IMPORTANT: The harness can be adjusted to three different heights.
Always ensure proper adjustment at or above your child's shoulders.
1. Open the zipper on the seat back to
access the harness strap retainers.
NOTE: Do not store anything in this
compartment. It is for accessing the
harness strap retainers only.
16
2. Pull the harness strap retainer away
from the seat back and turn 90
degrees to feed it through the harness
slot.
CLICK
3. Push the harness retainer through the
appropriate harness slot to the back of
the seat.
4. Turn the harness retainer to its original
position as shown so it properly retains
the harness.
5. Repeat for the second harness strap
then close the zipper on the seat back.
17