Important Safety Information; Safety Instructions; Grounding Instructions - Danby DKC5811BSL-2 Guide D'utilisation Et D'entretien

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
FOR YOUR SAFETY: Pertaining to the risk of Fire, Electric Shock or Injury to Persons.
GROUNDING
INSTRUCTIONS
WARNING CO CAN BE
2
DANGEROUS!
CO 2 Cylinders when charged contain high
pressure compressed gas which can be
hazardous if not handled properly. Read
and understand the following procedures
for CO 2 cylinders before installation:
WARNING
If it becomes difficult to breathe and/or
your head starts to ache, abnormal con-
centrations of carbondioxide (CO
be present in the area....
...CLOSE THE MAIN VALVE ON THE
CO 2 CYLINDER, VENTILATE AND
LEAVE THE ROOM IMMEDIATELY!
• This appliance must be grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of electric shock by providing
a path of least resistance for electric current.
• This appliance is equipped with a power cord having an equipment
grounding conductor and grounding plug. The plug must be plugged into
an appropriate wall outlet that is installed and grounded in accordance
with all existing local codes and ordinances.
• Consult a qualified electrician or service person if the grounding
instructions are not clearly understood, or if doubt exists as to whether
your electrical wall outlets are properly grounded.
1. Always check the D.O.T.
(Department of Transport) as
well as the T.C. (Transport
Canada) testdate located on the
neck of the cylinder before
installation. If the date is older
than five (5) years, do not use,
return the gas cylinder to a gas
supplier for re-certification
(service charges may be
applicable).
2. Always connect a CO
cylinder to a regulator. Failure to
do so could result in an
explosion which can possibly
2 ) may result in death or injury when the
cylinder valve is opened.
3. Never connect a CO
cylinder directly to beer keg.
4. Always secure a CO
cylinder in an "upright" position.
5. Always keep a CO
away from heat.
6. Never drop or throw a CO
cylinder.
7. Never connect a CO
unless there are two (2) safety
mechanism's in the pressure
system;
(a) One at or on the CO
(b) One at or on the product
container coupler in the
pressure gas line.
2 gas
2 gas
2 gas
2 gas cylinder
2 gas
2 cylinder
2 regulator.
3
NOTE: The regulator and keg
coupler supplied with this unit are
inclusive of such safety
mechanisms.
8. CO 2 gas cylinders should be
stored in the coolest part of the
establishment (preferably) at
70ºF (21ºC) and must always be
securely fastened in an "upright"
position.
9. Always ventilate area after any
2
leakage of CO .