Installing The Batteries - Canon Speedlite 430EX II Mode D'emploi

Installing the Batteries

Install four AA/R6 batteries.
Recycling Time and Flash Count
Recycling Time (Approx.) Flash Count (Approx.)
0.1 - 3.0 sec.
Based on new AA/LR6 alkaline batteries and Canon's testing standards.
Note that certain AA/R6 lithium batteries may become extremely hot
in rare cases during usage. Due to safety reasons, do not use
"AA/R6 lithium batteries".
Using AA/R6 batteries other than the alkaline type may cause improper
battery contact due to the irregular shape of the battery contacts.
If you change the batteries after firing many flashes continuously, be
aware that the batteries might be hot.
8
1
Open the cover.
Slide the battery compartment cover
as shown by the arrow and open it.
2 Install the batteries.
Make sure the + and – battery
contacts are correctly oriented as
shown in the battery compartment.
3
Close the cover.
Close the battery compartment cover
and slide it as shown by the arrow.
200 - 1400