Description Of The Symbols; Important Safety Instructions - Ayce DF-150A7-7 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DESCRIPTION OF THE SYMBOLS:

Before any use, refer to the corresponding section in this user manual.
In accordance with european directives applicable to this product.
WARNING: to avoid overheating, do not cover.
CAUTION: hot surface.
Recycle unwanted materials instead of disposing of them. All appliances and packaging
should be sorted and tendered at a regional recycling centre and be processed in an
ecological manner.

IMPORTANT SAFETY INSTRUCTIONS

1. Read all instructions carefully before using.
2. Make sure the voltage is the same as that indicated on the
rating plate of the appliance.
3. Do not operate this appliance if the cable or plug becomes
damaged.
4. Keep the appliance and cable away from sources of heat,
sharp objects or anything that may cause damage.
5. If the cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualifi ed
persons in order to avoid a hazard.
6. Ensure the appliance is switched off before connecting to
the mains power supply.
7. Switch off the power supply and disconnect from
mains supply when not in use, before cleaning or other
maintenance.
8. To disconnect the appliance, switch it "OFF", and then
remove the plug from outlet. Do not pull the cord to
disconnect the plug.
9. The heater must not be located immediately below
a socket-outlet.
10. Do not operate in areas where gasoline, paint or other
fl ammable liquids are used or stored.
11. Indoor use only.
12. In order to avoid overheating, do not cover the heater.
13. To prevent a possible fi re, do not block air intakes or
exhaust in any manner.
14. Do not touch the hot surfaces.
32 | 33
GB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Df-200a7-9Df-250a7-11Df-300a7-13

Table des Matières