Before First Use; General Assembly - Philips HR7776 Mode D'emploi

2 Before first use

Before you use the appliance and accessories
for the first time, thoroughly clean the parts
that come into contact with food.
To explore more helpful tips and
basic recipes online, you can:
1
Go to www.philips.com.
2
Click the search button
homepage.
3
Type the product number "HR7776,
HR7777 or HR7778" in the search box.
4
Find or download the information you
need from the searching result.
5
For inspiring recipes, pls visit www.philips.
com/kitchen.
3 Use your food
processor

General Assembly

Before you use or assemble any of the
accessories, make sure that you assemble
according to Fig. 2 to 10.
1
Turn the bowl clockwise until you hear a
click to fix it onto the motor unit.
2
Assemble the accessory or the accessory
equipped with the shaft to the bowl.
3
Put the ingredients in the bowl.
• For the citrus press, press the citrus
fruits on the cone, and go to Step 5.
4
Put the lid on the bowl, and turn the lid
clockwise until you hear a click to fix it.
Then put the pusher into the feeding tube.
• For the discs and mini juicer, put the
ingredients into the feeding tube with
the pusher.
5
6
7
Discs
on the
Before you start, make sure that you pick
your desired disc from following and assemble
according to Fig. 2:
•
•
•
Connect the power plug to the power
supply.
Check the advised ingredient quantity and
setting in Table 11. Turn the knob to the
desired speed setting.
After use, turn the knob to OFF, and then
unplug the appliance.
Name Purpose
For shredding
Reversible ingredients into thin
shredding or thick flat pieces
disc with the reversible
sides
For slicing
Adjustable ingredients to the
slicing disc slicing thickness you
set
Julienne disc For cutting
(HR7778 ingredients into thin
only) strips
Granulating For granulating
disc (HR7778 ingredients to small/
only) fine pieces
French fry For cutting
disc (HR7778 ingredients into thick
only) strips.
Caution
Be careful when you handle the slicing blade of disc. It
has a very sharp cutting edge.
Never use the disc to process hard ingredients, like
ice cubes.
Do not exert too much pressure on the pusher when
you press ingredients into the feed tube.
EN 5