User Manual - Philips HR7776 Mode D'emploi

If the blades get stuck, unplug
•
the appliance before you
remove the ingredients that
block the blades.
Be careful if hot liquid
•
is poured into the food
processor or blender as it can
be ejected out of the appliance
due to a sudden steaming.
This appliance is intended for
•
household use only.
Caution
Never switch off the appliance
•
by turning the blender jar,
the bowl, or their lids. Always
switch off the appliance by
turning the speed selector to 0
or OFF.
Unplug the appliance
•
immediately after use.
Always wait until the moving
•
parts stop running, then switch
off and unplug the appliance
before opening the lid and
reaching into any of the parts
that move in use.
Always switch off and
•
unplug the appliance if it is
left unattended, and before
assembling, disassembling,
cleaning and changing
accessories, or approaching
parts that move in use.
Thoroughly clean the parts
•
that come into contact with
food before you use the
appliance for the first time.
Refer to the instructions and
table for cleaning given in this
manual.
Never use any accessories
•
or parts from other
manufacturers that Philips does
not specifically recommend. If
you use such accessories or
parts, your guarantee becomes
invalid.
Do not exceed the maximum
•
level indication on the bowl or
the jar. Follow the quantities,
processing time and speed as
indicated in the user manual.
Let hot ingredients cool down
•
(< 80ºC) before processing
them.
Always let the appliance cool
•
down to room temperature
after each batch that you
process.
Certain ingredients such
•
as carrots may cause
discolorations on the surface
of the parts. This does not
have a negative effect on
the parts. The discolorations
usually disappear after some
time.
Noise level: Lc = 86 dB [A]
•
EN 3