Sony XS-AW8 Mode D'emploi page 8

 RCA input connection
When connecting to a car audio equipped with RCA output terminals, connect through the INPUT CH1(R)/
CH2(L) connector on the subwoofer using a RCA pin-type cable (not supplied).
Car audio*
RCA INPUT
* Not supplied
Notes
• For RCA input connection, connect the yellow power supply lead as close to the car battery as possible.
• When installing the input cables, keep them away from the yellow power supply lead. Running them close together may result
in interference noise.
• Be sure to insulate any loose, unconnected leads with electrical tape for safe measure.
• If noise is present, connect the subwoofer with the  high level input connection.
Remote Gain Controller Connection
Connect the cable of the remote gain controller to the GAIN CONTROLLER connector (page 4) on the
subwoofer.
8
GB
RCA OUTPUT
RCA pin cable*

Black
Yellow
Blue/White
REMOTE TURN-ON
GND
For details, see "Making
BATTERY
power connections"
(page 6).