System Connection - Sony XS-AW8 Mode D'emploi

System Connection

The following is a depiction of the system connections typically used to connect the subwoofer to a car audio
system. Refer to the operating instructions supplied with your car audio for more details about the system
connection for your car audio unit.
 High level input connection
When connecting to a car audio equipped with speaker output only, connect through the POWER/HIGH LEVEL
INPUT connector on the subwoofer using the power supply leads .
SPEAKER OUT
Car audio*
* Not supplied
Notes
• Do not connect the  terminal of the speaker system to the car chassis, and do not connect the  terminal of the right
speaker with that of the left speaker.
• When installing the input cables, keep them away from the yellow power supply lead. Running them close together may result
in interference noise.
• For high level input connection, the subwoofer operates automatically upon receiving an audio signal and turns off
automatically if there is no signal for 30 seconds. However, this function is not guaranteed for all car audio units.
Purple
Purple/Black
Green
Green/Black

*
*
*
*
*
*
*
*
Black
Yellow
Blue/White
REMOTE TURN-ON
Front or Rear speakers*
GND
For details, see "Making
BATTERY
power connections"
(page 6).
7
GB