Troubleshooting - Bosch SGE68X55UC Notice D'utilisation

3

Troubleshooting

D ishwashers may occasionally
T r o u b l e s h o o t i n g
exhibit problems that are unrelated to
Fault Cause
Error code Supply hose kinked.
":‚‰ is lit.
Water supply turned off.
Water supply jammed or calcified.
Filter in the water supply blocked.
Error code Intake opening (on right inside of
":‹ˆ is lit. dishwasher) covered by dishes.
Error code Heating element calcified or soiled. Clean dishwasher with a dishwasher clean-
":‚ƒ is lit.
Error code Filters 1b are soiled or blocked.
":ƒƒ is lit.
Error code Waste-water hose kinked or
":ƒ... is lit. blocked.
Siphon connection still sealed.
Cover on the drain pump loose.
* This is an optional feature which may or may not be included with your dishwasher.
Troubleshooting en-us
a malfunction of the dishwasher itself.
The following information may help
you with a dishwasher problem
without involving a repair
professional.
Remedial action
Install supply hose without kinks.
Turn on the water supply.
Turn on the water supply.
Flow rate must be min. 10 l/min. when
water supply is open.
Switch off the dishwasher and pull out the
power supply plug. Turn off the tap.
Unscrew water connection.
Clean filter in the supply hose. Screw water
connection on again. Check for leaks.
Reconnect power supply. Switch on the
dishwasher.
Arrange dishes so that the intake opening is
not obstructed.
ing agent or descaler. Operate the dish-
washer with water softening system and
check the setting. ~ "Using special
dishwasher salt" on page 14
Clean filters. ~ "Filters" on page 35
Install hose without kinks, remove any resi-
due.
Check connection to siphon and open if
required.
Lock cover correctly. ~ "Drain pump"
on page 37
39