Wash Cycle End; Auto Power Off; Switching Off The Appliance - Bosch SGE68X55UC Notice D'utilisation

en-us Operating the Dishwasher

Wash cycle end

The wash cycle has ended when the
display 8 reads ‹:‹‹.

Auto power off

This setting determines the length of
time the control panel stays
illuminated after the cycle is
complete. To save energy the
recommended setting is ˜:‹‚.
This setting can be adjusted from
˜:‹‹ to ˜:‹ƒ.
˜:‹‹ dishwasher does not turn off
automatically
˜:‹‚ dishwasher turns off
automatically after 1 minute
˜:‹ƒ dishwasher turns off
automatically after
120 minutes (2 hours)
To change the setting:
Press the On/Off button (.
1.
Hold down the function key #
2.
and press the Start button P
until the display 8 indicates
š:‹x (x can be any number).
Release both buttons.
3.
Press the function key # until
4.
the display 8 indicates ˜:‹x.
Press the function key 3 until
5.
the display corresponds with your
requirements.
Press the Start button P.
6.
32

Switching off the appliance

Short time after the end of the wash
cycle:
Press On/Off button (.
1.
Remove the dishes when they
2.
have cooled down.
9 WARNING
RISK OF INJURY!
To avoid risk of injury, always
use caution when opening the
door during or following a wash
cycle as hot water or steam
may escape. Do not fully open
the door until water noises have
stopped and steam has
subsided.
To reduce risk of injury, do not
allow children to play in or on
the dishwasher.
When children become old
enough to operate the
appliance, it is the responsibility
of the parents/legal guardians
to ensure the children are
instructed in safe practices by
qualified persons.