Use Of Extension Cord - Hitachi M 12VC Mode D'emploi

USE OF EXTENSION CORD

Make sure your extension cord is in good condition. When using an extension cord, be sure to use one
heavy enough to carry the current your product will draw.
An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table
shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use
the next heavier gage. The smaller the gage number, the heavier the cord.
Ampere Rating
More Not More
Than Than
0 – 6
6 – 10
10 – 12
12 – 16
WARNING:
SAVE THESE INSTRUCTIONS
MAKE THEM AVAILABLE TO
OWNERS OF THIS TOOL!
MINIMUM GAGE FOR CORD SETS
Total Length of Cord in Feet (Meter)
0 – 25
(0 – 7.6)
18
18
16
14
Avoid electrical shock hazard. Never use this tool with a damaged or frayed
electrical cord or extension cord.
Inspect all electrical cords regularly. Never use in or near water or in any
environment where electric shock is possible.
OTHER USERS
26 – 50
(7.9 – 15.2) (15.5 – 30.5)
16
16
16
12
AND
AND
51 – 100 101 – 150
(30.8 – 45.7)
AWG
16
14
14
Not Recommended
English
14
12
12
7