Operating Mode „Time And Temperature; Operating Mode "Product Keys" - Display Of Time And Product Key - Salvis Fryline Série Mode D'emploi

4.3.2 Operating mode „Time and temperature"
"Temperature/pump" key (pump option)
- Querying the actual temperature when the appliance is switched on.
- Switch pump on/off, only if the appliance has been switched off at "on/off" key.
The indicator light glows when
the pump is switched on
(option).
The control lamp glows when
the automatic basket lift is
switched on (option).
"Start/stop" key
- Starting or stopping the
short time clock,
- Lowering/raising the basket
lift
- Changing the basic settings
for the short time clock
"P" key in combination with other keys
- Temperature selection (keys 1, 2, 3
and 4)
- Changing the stored temperature
- Display of the fat utilization period
- Setting of parameters
4.3.3

Operating mode "Product keys" - display of time and product key

"Temperature/pump" key (pump option)
- Querying actual and setpoint temperature when the appliance is switched on.
- Switch pump on/off, only if the appliance has been switched off at "on/off" key.
The indicator light glows when
the pump is switched on
(option).
The control lamp glows when
the automatic basket lift is
switched on (option).
"Start/stop" key
- Starting or stopping the
short time clock,
- Lowering/raising the basket
lift
"P" key in combination with other keys
- Changing the stored time and
temperature
- Display of the fat utilization period
- Setting of parameters
Display
- Time in minutes and seconds
- Parameter number
"1, 2, 3 and 4" keys - time/temperature
- Selection of the short time clock,
- Interrupting the acoustic signal,
- Selecting the temperature
The indicator lights in the keys
- are illuminated when the short time clock is switched on,
- flash when the short time clock has expired
Display
- Time in minutes and seconds
- Parameter number
- Actual temperature
Keys "1, 2, 3 and 4" = 20 product keys
- Selection of the "product keys".
- Interrupting the acoustic signal,
- Selecting the temperature
When setting the "product keys" mode, the indicator
lights in keys 1-4 are without function.
Display
- Setpoint or actual temperature.
- Fat utilization period
- Parameter values
- Error number
"Up" key
"Down" key
In increments of 1 or 5,
depending on the setting in
chapter 8.5
Dot is illuminated
when heating is on,
dot flashes
during the heating-up process if
the actual temperature is by
more than 10°C lower than the
setpoint temperature.
Wait until the dot has gone out
before starting with the frying
process.
"On/off" key
- For switching on/off, hold it
down for 3 seconds.
Display
- "Product key" number
- Setpoint temperature
- Fat utilization period
- Parameter values
- Error number
"Up" key
"Down" key
In increments of 1 or 5,
depending on the setting in
chapter 8.5
Dot is illuminated
when heating is on,
dot flashes
during the heating-up process if
the actual temperature is by
more than 10°C lower than the
setpoint temperature.
Wait until the dot has gone out
before starting with the frying
process.
"On/off" key
- For switching on/off, hold it
down for 3 seconds.
en
45