Maintenance; Resetting The Motor Thermostat - shark NV22 Guide D'utilisation

Maintenance

Resetting the Motor Thermostat

Your Shark ® Upright Vacuum is equipped
with a protective Motor Thermostat.
If the motor should overheat, the
thermostat shuts off the power.
To reset the Motor Thermostat:
Move the Power Button to the
"O – Off" position.
Unplug the vacuum.
Check for clogged hose or filter; unclog
hose and replace filter. Refer to
Checking for Blockages on page13.
14 TOLL FREE: 1-800-798-7398
Wait 45 minutes for vacuum to cool;
then plug in the vacuum.
Turn the Power Switch to the "I – On"
position to start the vacuum.
Note: if vacuum still does not start,
contact Customer Service at:
1-800-798-7398.