Using The Vacuum - shark NV22 Guide D'utilisation

Using the Vacuum

Your Shark ® Upright Vacuum is a versatile
tool that can be used to clean bare floor
surfaces or carpets – with the click of
a switch.
Stand the vacuum into the upright position.
Plug in the vacuum.
Off
1
1 Start with the Power Switch in the
"O Off" position.
2 Place your foot on the Floor Power
Nozzle and pull handle towards you.
3 Set the Power Switch to desired
cleaning setting.
6 TOLL FREE: 1-800-798-7398
Bare Floors / Tools
Carpets
4 When cleaning bare floors:
Select the "I On" position for
suction only cleaning to avoid
scattering dirt while cleaning.
When cleaning carpets:
Ensure you have pulled the handle
towards you and select the
"II Brush Roll On" position to
agitate the carpet fibers for
deeper cleaning performance.
4
IMPORTANT: To protect your
carpets, the Brush Roll will only turn
on when you have pulled the handle
towards you and released the Floor
Power Nozzle.