To Select Beep Tone Options; To Read The Cycle Counter - Panasonic NE-1037 Mode D'emploi

F. To Select Beep Tone Options
The Beep Tone can be set, ON or OFF.
PAD
1.
2.
3.
4.
5.
G. To Read the Cycle Counter
The oven can display the total number of times the oven has been operated cumulatively. This may be used
to analyze usage of the oven and traffic flow at the location.
PAD
1.
2.
+
NE-1037_EYG.indb 21
How to Operate
• Open the door.
• Press Program Pad.
• Press Start Pad.
• Press Start Pad. Select "OFF" of Beep Tone.
Stage Indicator 1 = ON
Stage Indicator 2 = OFF
• Press the Program Pad again. You have completed
programming the beep tone.
• 2 seconds later, "0" will appear in the display.
• Open the door.
• While pressing Stop/Reset Pad, press Power
Level Pad. The display shows the total cumulative
number of times the oven has been used.
Example:
• "9999" means the oven has been used
999,900 to 999,999 times.
• "0020" means the oven has been used
2,000 to 2,099 times.
• If the total cumulative number of times is less
than 100 times, the display will not be changed.
• 2 seconds later, "0" will appear in the display
window.
- 21 -
INSTRUCTION
INSTRUCTION
2020/11/25 10:37:23