HOW TO INSTALL
Take out the 4 long fiber poles
STEP1
and the 2 short fiber poles with
plastic elbow.
Set up 2 short fiber poles
STEP4
with plastic elbow.
(Please note that the shorter one ①
are on the top and bottom, while the
longer ② are on both sides.)
1
2
1
STEP2
Connect all the fber poles.
Fasten the buckiles on the
STEP5
doth on the fiber rods on the
left and right sides respectively.
1
2
3
1
STEP3
STEP6
STEP7
2
Separately insert 4 long fiber
poles into 4 long tunnels.
Fasten the straps and tunnels
to the four comers and side
snaps to secure the tent.
Fasten all the buckles on the
fiber poles.